-    Oilkleen – Electrostatic Oil Cleaner (Varnish Removal system)
-    Thermojet Oil Purifier
-    EHC  Fluids Purifier
-    Coalescer – Water removal within filtration system
-    Diesel Fuel Filtration & Water Removal systems
-    Mobile Filtration Unit
-    Oil Analysis unit (water sensor and particle counter)

OIKLEEN – www.oilkleen.com
The OILKLEEN® GREEN MACHEEN™,  electrostatic filter works on principles of physics, creating 18 static energy fields. The contaminated oil is forced through these fields at a specific rate. The energy from the fields pulls the contamination particles out of the oil. Contaminant particles bond to the millions of sharp edges in our collection media inside the OILKLEEN® filter cartridge.
Electrostatic filters prevent varnish and oxidation by removing sub-micron particles. Mechanical filtration can’t remove sub-micron particles, so oxidation and varnish still occur.

• Eliminate servo valve trips
• Eliminate varnish and sludge
• Eliminate component failure
• Increase lubricant life
• Reduce downtime

Electrostatic filtration has a wide range of applications and benefits

THERMOJET OIL PURIFIER – www.lsc.com
ThermoJet® Oil Purifier is a state-of-the-art, on-line industrial oil-purification system that removes free, emulsified and dissolved water and light hydrocarbons from industrial lubricants and hydraulic oils. The unique air/gas stripping technology employed by LSC’s ThermoJet® Oil Purifier makes it practical and efficient—allowing the ThermoJet® Oil Purifier to outperform centrifuges, coalescers and the more complex vacuum dehydration systems.

Applications: Water Removal and Degasification
ThermoJet® Oil Purifier removes not only free water, but also emulsified and dissolved water, keeping compressor, turbine lube oil and hydraulic systems water free. It will take oil that contains 1000 ppm of water down to a total water content of less than 100 ppm within eight passes of the oil through the unit.
ThermoJet® Oil Purifier removes dissolved light hydrocarbon gases, such as propane and H2S from industrial lubricants. In refineries and petrochemical plants, an ideal application is the removal of hydrogen sulfide from compressor seal oil. The ThermoJet® system returns the viscosity of the lube oil and restores the oil flash point to like-new levels, eliminating the need to dispose of gas-laden and sour lube oils.

Operational Benefits
• Increased machinery reliability: no machinery failures due to
poor oil quality
• All forms of water removed to below 100 ppm
• Eliminate oil changes by always keeping oil like new
• Eliminate new oil purchases and reduce oil inventories
• Reduce particle filtration: Water catalyzes rust and corrosion formation,   which produces sludge. When oil is maintained with water contamination   below 100 ppm, corrosion, rust and sludge are eliminated, and filter   changes are significantly reduced
• Zero disposal of waste oil
• No drum disposal


EHC FLUIDS MINTENANCE – www.cleanoil.com
we provide equipment for Phosphate Ester (PE) fluid maintenance and demonstrate that  Phospate ester fluids are not a comsubmable. We offer technologies that remove 100% of contaminants and restore fluid systems to peak performance. Costly flushes, unplanned downtime and equipment failure can all be avoided when your P.E. fluid, such as Fyrquel EHC or 220, is properly maintained.
EPT technologies provide complete, like-new restoration of phosphate ester EHC fluid without the expense of downtime, flushing, or oil change.  Whether the problem is blackened fluid, dissolved metals, gel, varnish, acid, moisture, or resistivity, EPT technologies restore fluid to like new condition.

COALESCER
Separator/Postfilter Element  Water Separating Turbine Oil Filter Element designed and constructed with teflon coated stainless steel screen with pleated, multi-layered micro-fiberglass fibers for high efficency particulate removal from turbine oil.  Turbine Lube Oil Conditioning System fRemoves particulate down to an ISO 16/14/11 Cleanliness Code & Water to a Content  100 ppm or less.

DIESEL FUEL & WATER REMOVAL SYSTEMS
Water in fuel is the primary cause of failture.  An effective fuel/water separator eleminates the potential for engine failture due to water contamination.  Kaydon Filtration Fuel/Water Separators can help meet the requirements for cleaner fuel.  Whether the application requires in-line fuel filtration during transfer or off-line fuel filtration of a fuel tank

MOBILE FILTRATION UNIT
Mobile Filtration Unit has many features including two spin-on elements in series to condition hydraulic fluids with two filter passes with each pass through the filter cart.  Media options available down to 1 micron, water removal media and stainless mesh media.  Flow rates up to 22 gpm / 82 lpm with a variety of power options.  Ideal for hydraulic fluid conditioning and cleaning oils during fluid transfer.

Oil Analysis Unit
-    Patch Test Kit
-    Particle counter
-    Water Sensor